Heirloom Safe Model H-48 48"Hx21"Wx20"D
The Heirloom Series is Sun Welding's home and office series, offering the best in home security. The Heirloom Series comes standard with a solid 3/16" steel plate door and 12 gauge solid steel body.
The lock is protected by a 1/4" hard plate and 1/2" absorption plate, to resist from impact, drilling, or punch attacks . The independent bolt works are protected by two spring loaded re-locking systems, which lock the entire bolt works together. The bolt works offers three active bolts on the opening side of the door and five dead bolts on the hing side of the door.
The Heirloom comes complete with a thirty minute fire rating (available upgrades to 1.5 hours). The UL fire insulation protects all six interior surfaces. The exterior comes in your choice of gloss colors. The finishing touch is the hand applied artwork. The Heirloom offers the Sun Welding quality in protection and strength for your valuables and firearms.
Proudly made in America!
Sun Welding lines the six interior walls with 5/8" fire board. See our fire 'Fire Rating' tab for more information. Then we hand build each interior from solid 3/4" particle board. It is then finished a velour fabric (variety of colors to choose from). With one rifle configurations to choose or a solid collector shelf interior we have the interior for you. We can also custom build an interior made to your specifications. See 'Interiors' tab to view our interior options. There are six pre-drilled mounting holes in the bottom of every safe for bolting the safe down to the floor. > SEE 'INTERIORS' TAB
Sun Welding's independent mounted bolting system stops a wide variety of attacks. Using a cam drive system to gear the linkage these parts will not break under pressure. The Heirloom Series offers six 1" diameter locking bolts (3 active each side, 3 dead hinge side). With two re-lockers, protected by Armor Hard Plate and second 1/2" steel plate the security is reinforced. > READ MORE
Sun Welding gives the user the option of a UL listed group 2 combination mechanical lock or electronic lock. We offer a wide variety of manufactures from BigRed, S&G, LaGard, and SecuRam. In addition to EMP proof redundant style locks. > SEE 'OPTIONS' TAB
Every Sun Welding Safe exceeds the UL RSC and CA DOJ requirements. We tested out entry level safes to ensure the test requirements. > READ MORE
WANT TO READ MORE ON HOW SUN WELDING BUILDS EACH SAFE, VISIT HOW THEY ARE BUILT.
The fire insulation is used on all six sides of the safe. In addition heat sensitive expanding fire seal that swells up to eight times its size is used to fill in the space around the door. The fire rating test is completed by taking a safe and placing it in an oven that is 1200_ for 'x' minutes. At 'x' minutes the internal temperature of the safe reaches 350_. The actual burn time of the safe has many factors such as temperature of the fire and length of the fire.
- 30 Minutes Standard weighs 375 lbs
- 1/4" Door w/ 10 Gauge Body 449 lbs
- 3/8" Door w/ 3/16" Body 553 lbs
- 1/2" Door w/ 1/4" Body 670 lbs
- Internal dimensions approximately 46.5"H x 19"W x 13.75"D
- 60 Minutes increases weight to 420 lbs
- 1/4" Door w/ 10 Gauge Body 494 lbs
- 3/8" Door w/ 3/16" Body 598 lbs
- 1/2" Door w/ 1/4" Body 715 lbs
- Internal dimensions approximately 45.25"H x 17.75"W x 12.5"D
- 90 Minutes increases weight to 465 lbs
- 1/4" Door w/ 10 Gauge Body 539 lbs
- 3/8" Door w/ 3/16" Body 643 lbs
- 1/2" Door w/ 1/4" Body 760 lbs
- Internal dimensions approximately 44"H x 16.5"W x 11.25"D